Roll over image to zoom in
Powersoft T304
$1,400.00
The Powersoft T304 combines efficient Class‑D amplification with advanced digital signal control and optional networking in a compact package. With high power handling, flexible DSP configuration, and multiple control interfaces, it’s optimized for both touring and installation systems requiring powerful, reliable, and intelligent amplification.
Absolutely. Here’s a fully clean, icon-free, and link-free overview of the Powersoft T304 amplifier, with all domain references removed:
Powersoft T304 – 4‑Channel Class‑D Amplifier with Integrated DSP & Dante (Optional)
The Powersoft T304 is a powerful four-channel amplifier designed for professional audio applications, combining high power output, integrated DSP, and flexible control connectivity—all in a single 1U rack unit.
Amplification & Power Output
- Four independent Class‑D channels, each delivering:
- 750 W at 2 Ω
- 750 W at 4 Ω
- 750 W at 8 Ω
- Bridge mode enables 1,500 W per bridged pair at 4 Ω or 8 Ω
- Provides high voltage output (~145 V peak) and fast current capability (up to 50 A peak)
DSP and Signal Processing Features
- 96 kHz internal sampling with high-resolution converters for wideband audio and low distortion
- Built-in DSP per channel includes:
- TruePower™, RMS voltage/current, and peak limiting
- Raised-cosine, customizable FIR filters (up to ~42 ms), and parametric IIR filters
- Crossover types including linear-phase FIR, Butterworth, Linkwitz‑Riley, and Bessel
- Input delay (up to 2 seconds) and output delay (~100 ms) with fine timing control
- Live impedance monitoring and Active DampingControl™
Control & Connectivity
- Four analog XLR inputs plus one AES3 digital input (with link-through)
- Optional Dante module permits network audio transport and control via Ethernet
- Front panel includes a display and push-buttons to manage gain, mute, delay, and preset recall per output
- Alternative control through Ethernet web interface (via Wi‑Fi access point) or proprietary software
Protection, Power & Thermal Performance
- Universal regulated switch-mode power supply with power factor correction supports global voltage ranges (100–240 VAC, 50–60 Hz)
- Low idle power consumption (~32 W), with efficient thermal dissipation even under load
- Protects against overheating, short-circuit, DC faults, clipping, and low-impedance operation
- Intelligent variable-speed fans ensure cooling with minimal noise
Technical Specifications
| Feature | Specification |
|---|---|
| Channels | 4 (Class-D output) |
| Output Power (each ch) | 750 W @ 2 Ω / 4 Ω / 8 Ω |
| Bridge Mode | 1,500 W per bridged pair |
| Max Voltage/Current | ~145 V peak / 50 A peak |
| Latency | ~2.5 ms fixed |
| DSP Sampling Rate | 96 kHz |
| FIR Filter Max Length | ~42 ms |
| Frequency Response | 20 Hz – 20 kHz (± 0.5 dB) |
| THD + N | < 0.05% typical (< 0.1% full range) |
| S/N Ratio | > 110 dB (A-weighted) |
| Input Sensitivity | ~2.57 Vrms (gain ~32 dB) |
| Dimensions | 1U rack, approx. 484 × 405 × 44 mm |
| Weight | ~7–8 kg |
Applications
- Compact amplifiers for medium-sized PA systems and stage monitoring
- Bi-amped or passive loudspeakers using high-voltage, shared-power architecture
- Networked audio systems employing Dante for streamlined cabling
- Scenarios requiring onboard DSP control, monitoring, and remote preset recall
Reviews
There are no reviews yet.